Protecto 401 Ceramic EpoxyProtecto 401 Ceramic Epoxy
CALL TOLL FREE 1-888-SPEC401 or Email

TOXICITY CHARACTERISTICS OF CURED
FILM OF PROTECTO 401

Cured Films of Protecto 401 have been independently tested using the Environmental Protection Agency Method 1311 Toxicity Characteristic Leaching Procedure. This procedure is a determination of leachable characteristics of the sample for the following chemicals.

Arsenic
Barium
Cadmium
Chromium
Lead
Mercury
Selenium
Silver
Benzene
Carbon tetrachloride
Chlorobenzene
   Chloroform
1,2-Dichloroethane
1,1-Dichloroethane
Methyl ethyl ketone
Tetrachloroethylene
Trichloroethylene
Vinyl Chloride
Toluene
o-Cresol
m & p Cresol
Cresol (o+m+p)
   1,4-Dichlorobenzene
2,4-Dinitrotoluene
Hexachlorobenzene
Hexachlorobutadiene
Hexachloroethane
Nitrobenzene
Pentachlorophenol
Pyridine
2,4,5-Trichlorophenol
2,4,6-Trichlorophenol

Fully cured films of Protecto 401 do not leach any of these chemicals in an amount which exceeds that allowed by EPA Test Method 1311.

Based on the above testing and a literature search, Protecto 401, when used to protect sewer lines against corrosion, does not present a health hazard to humans or any risks to the environment.

Back to Table of Contents

CALL TOLL FREE 1-888-SPEC401 or Email
Logos and pictures shown are trademarks of their respective owners
Copyright © 2000, Digital Trends Corporation