Protecto 401 Ceramic Epoxy - Standard For Lining Ductile Iron Pipe and Fittings For Sewer Service

CALL TOLL FREE 1-888-SPEC401 or Email

Procedures for sealing cut ends and repairing field damaged areas
of PROTECTO 401 lined pipe and fittings.

PROTECTO 401 JOINT COMPOUND TECHNICAL DATA

DESCRIPTION: A brushable novalac epoxy designed for sealing cut ends and repairs when pipes are lined with Protecto 401 Ceramic Epoxy.

LIMITATIONS: This material should be used on spigots and in bell sockets only after the pipe or fitting is lined with Protecto 401 Ceramic Epoxy. Protecto Joint Compound can be used over Protecto 401 or on bare substrate. Note: Do not apply Protecto 401 over Protecto Joint Compound.

SURFACE PREPARATION: The surface preparation shall be equal to the specifications for the project or as outlined in the touch-up procedure. Do not apply Protecto Joint Compound over wet or frozen surfaces.

DRY FILM THICKNESS: As outlined in specifications.

APPLICATION DATA
APPLICATION: Brush, roll, or airless spray.
THINNING: Thin or clean up with Methyl Ethyl Ketone.

PHYSICAL DATA:
VOLATILE ORGANIC CONTENTS:
< 1.40 Ibs. per gal. mixed unthinned

SAFETY DATA: See individual product label for safety and health data information. Individual Material Safety Data Sheets are available upon request.

Back to Table of Contents

CALL TOLL FREE 1-888-SPEC401 or Email

Procedures for sealing cut ends and repairing field damaged areasof PROTECTO 401 lined pipe and fittings.

Procedures for sealing cut ends and repairing field damaged areas
of PROTECTO 401 lined pipe and fittings.